Safety+Rules+In+Design

put in my top 10 rules when using tools and materials minimum requirements: __ Rule #1: __ Be careful with tools. If you are walking around with a tool such as a screw driver, always keep the point down so that it will not hurt someone if you accidently run into them. __ Rule #2: __ Always wear the safety goggles when necessary. Use them for example, when you are spray painting or drilling a hole into a piece of wood. __ Rule #3: __ Always wear gloves when necessary. Wear them when you are cutting something with a big knife. __ Rule #4: __ Be careful with the exacto- knife. Always remember to lock it when you are using it and bring it back down when you have finished using it. __ Rule #5: __ Be careful where you put your fingers. Watch where you put your hands when you are using tools like a hammer, knife etc because you can injure yourself or someone else if you are not careful. __ Rule #6: __ Put back materials when you are done using them. Remember where you found them so that you can put them back there when class is done. __ Rule #7: __ Do not play with the tools and materials. Use them when you need them, otherwise do not use them. __ Rule #8: __ Do not waste the materials. If you have left over paper for example, you can use them put them in the recycling box. __ Rule #9: __ Do not lose the materials. Remember where you put them so that when you need them you know where they are. __ Rule #10: __ Do not fool around with the tools and materials. If you do you can hurt yourself or someone else. __Steps On How to Use a Hammer Properly:__ [] __ Video __ __ [|Safety Video] __ __ Bibliography: __ __[] __ __[] __ __notes from class __
 * 15 lines
 * a reflection of each rule
 * 1 link
 * 1 video
 * bibliography